6ES7317-2FK14-0AB0 – SIMATIC S7-300

Thông số kỹ thuật: PLC S7-300 6ES7317-2FK14-0AB0

• Nhãn hiệu/Nhà sản xuất: Siemens
• Mã sản phẩm: 6ES7317-2FK14-0AB0
• Loại sản phẩm: CPU Module
• Điện áp nguồn: 24 V dc
• Program capacity: 1.5 MB
• Current consumption: 750 mA
• Inrush current: 4 A
• Cpu processing time: 0.025 µs (Bit Operation)
• Để sử dụng với: Simatic S7-300
• Interface type: RS-485
• Programming language: LAD;FBD;SCL;STL;Graph;HiGraph;CFC
• Power loss: 4.65 W

SIMATIC S7-300 CPU317F-2 PN/DP, CENTRAL PROCESSING UNIT WITH 1.5 MBYTE WORKING MEMORY, 1. INTERFACE MPI/DP 12MBIT/S, 2. INTERFACE ETHERNET PROFINET, WITH 2 PORT SWITCH, MICRO MEMORY CARD NECESSARY

Toàn Phát đối tác phân phối độc quyền các thiết bị công nghiệp SIEMENS – 6ES7317-2FK14-0AB0 chính hãng đầy đủ hóa đơn chứng từ và nguồn gốc xuất sứ.
Tất cả sản phẩm của Toàn Phát được bảo hành 12 tháng.

Chính sách khi mua hàng SIMATIC S7-300

Chính sách bảo hành

Khi mua hàng tại TPNEWTECH, tất cả sản phẩm của chúng tôi được bảo hành 12 tháng. Luôn sẵn sàng hỗ trợ sửa chữa và bảo trì lắp đặt cho tất cả KH dù KH có mua nhiều hay mua ít.
Hỗ trợ sửa chữa tận nơi đối với KH ở khu vực nội thành TP.Hồ Chí Minh.
KH ở xa có thể gửi hàng thông qua các bên vận chuyển để được sửa chữa.

Chính sách vận chuyển

Tất cả KH khi mua hàng có địa chỉ nhận hàng ở khu vực TP.Hồ Chí Minh sẽ được miễn phí hoàn toàn chi phí giao hàng (thời gian giao hàng nội thành HCM từ 1-3 ngày làm việc).
Đối với các KH ngoại thành tùy vào số lượng đặt hàng lớn hay nhỏ chúng tôi sẽ linh động tối ưu chi phí giao hàng cho quý khách.

Hướng dẫn mua sản phẩm SIEMENS – 6ES7317-2FK14-0AB0

Để mua hàng quý khách có thể liên hệ với chúng tôi bằng cách gọi điện thoại hoặc Zalo

Hoặc gọi qua số điện thoại Hotline: (+84) 903 908 082

Thông tin kỹ thuật bổ sung 6ES7317-2FK14-0AB0

		SIMATIC S7-300 CPU317F-2 PN/DP, Central processing unit with 1.5 MB work memory, 1st interface MPI/DP 12 Mbit/s, 2nd interface Ethernet PROFINET, with 2-port switch, Micro Memory Card required
General information
HW functional status		01
Firmware version		V3.2
Engineering with
● Programming package		STEP 7 V5.5 or higher, Distributed Safety V5.4 SP4
Supply voltage
Rated value (DC)
● 24 V DC		Yes
permissible range, lower limit (DC)		20.4 V
permissible range, upper limit (DC)		28.8 V
external protection for power supply lines (recommendation)		2 A min.
Mains buffering
● Mains/voltage failure stored energy time		5 ms
● Repeat rate, min.		1 s
Input current
Current consumption (rated value)		750 mA
Current consumption (in no-load operation), typ.		150 mA
Inrush current, typ.		4 A
I²t		1 A²·s
Power loss
Power loss, typ.		4.65 W
Memory
Work memory
● integrated		1 536 kbyte
● expandable		No
● Size of retentive memory for retentive data blocks		256 kbyte
Load memory
● Plug-in (MMC)		Yes
● Plug-in (MMC), max.		8 Mbyte
● Data management on MMC (after last programming), min.		10 y
Backup
● present		Yes; Guaranteed by MMC (maintenance-free)
● without battery		Yes; Program and data
CPU processing times
for bit operations, typ.		0.025 µs
for word operations, typ.		0.03 µs
for fixed point arithmetic, typ.		0.04 µs
for floating point arithmetic, typ.		0.16 µs
CPU-blocks
Number of blocks (total)		2 048; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.
DB
● Number, max.		2 048; Number range: 1 to 16000
● Size, max.		64 kbyte
FB
● Number, max.		2 048; Number range: 0 to 7999
● Size, max.		64 kbyte
FC
● Number, max.		2 048; Number range: 0 to 7999
● Size, max.		64 kbyte
OB
● Size, max.		64 kbyte
● Number of free cycle OBs		1; OB 1
● Number of time alarm OBs		1; OB 10
● Number of delay alarm OBs		2; OB 20, 21
● Number of cyclic interrupt OBs		4; OB 32, 33, 34, 35
● Number of process alarm OBs		1; OB 40
● Number of DPV1 alarm OBs		3; OB 55, 56, 57
● Number of isochronous mode OBs		1; OB 61 – isochronous mode is possible either on DP or PROFINET IO (not simultaneously)
● Number of startup OBs		1; OB 100
● Number of asynchronous error OBs		6; OB 80, 82, 83, 85, 86, 87 (OB83 only for PROFINET IO)
● Number of synchronous error OBs		2; OB 121, 122
Nesting depth
● per priority class		16
● additional within an error OB		4
Counters, timers and their retentivity
S7 counter
● Number		512
Retentivity
— adjustable		Yes
— lower limit		0
— upper limit		511
— preset		Z 0 to Z 7
Counting range
— adjustable		Yes
— lower limit		0
— upper limit		999
IEC counter
● present		Yes
● Type		SFB
● Number		Unlimited (limited only by RAM capacity)
S7 times
● Number		512
Retentivity
— adjustable		Yes
— lower limit		0
— upper limit		511
— preset		No retentivity
Time range
— lower limit		10 ms
— upper limit		9 990 s
IEC timer
● present		Yes
● Type		SFB
● Number		Unlimited (limited only by RAM capacity)
Data areas and their retentivity
retentive data area in total		all, max. 256 KB
Flag
● Number, max.		4 096 byte
● Retentivity preset		MB 0 to MB 15
● Number of clock memories		8; 1 memory byte
Data blocks
● Retentivity adjustable		Yes; via non-retain property on DB
● Retentivity preset		Yes
Address area
I/O address area
● Inputs		8 192 byte
● Outputs		8 192 byte
Process image
● Inputs		8 192 byte
● Outputs		8 192 byte
● Inputs, adjustable		8 192 byte
● Outputs, adjustable		8 192 byte
● Inputs, default		256 byte
● Outputs, default		256 byte
Subprocess images
● Number of subprocess images, max.		1; With PROFINET IO, the length of the user data is limited to 1600 bytes
Digital channels
● Inputs		65 536
— of which central		1 024
● Outputs		65 536
— of which central		1 024
Analog channels
● Inputs		4 096
— of which central		256
● Outputs		4 096
— of which central		256
Hardware configuration
Number of expansion units, max.		3
Number of DP masters
● integrated		1
● via CP		4
Number of operable FMs and CPs (recommended)
● FM		8
● CP, PtP		8
● CP, LAN		10
Rack
● Racks, max.		4
● Modules per rack, max.		8
Time of day
Clock
● Hardware clock (real-time)		Yes
● retentive and synchronizable		Yes
● Backup time		6 wk; At 40 °C ambient temperature
● Deviation per day, max.		10 s; Typ.: 2 s
● Behavior of the clock following POWER-ON		Clock continues running after POWER OFF
● Behavior of the clock following expiry of backup period		Clock continues to run with the time at which the power failure occurred
Operating hours counter
● Number		4
● Number/Number range		0 to 3
● Range of values		0 to 2^31 hours (when using SFC 101)
● Granularity		1 h
● retentive		Yes; Must be restarted at each restart
Clock synchronization
● supported		Yes
● to MPI, master		Yes
● to MPI, slave		Yes
● in AS, master		Yes
● in AS, slave		Yes
Digital inputs
Number of digital inputs		0
Digital outputs
Number of digital outputs		0
Analog inputs
Number of analog inputs		0
Analog outputs
Number of analog outputs		0
Interfaces
Number of industrial Ethernet interfaces		1
Number of PROFINET interfaces		1
Number of RS 485 interfaces		1
Number of RS 422 interfaces		0
1. Interface
Interface type		Integrated RS 485 interface
Physics		RS 485
Isolated		Yes
Power supply to interface (15 to 30 V DC), max.		200 mA
Protocols
● MPI		Yes
● PROFIBUS DP master		Yes
● PROFIBUS DP slave		Yes
● Point-to-point connection		No
MPI
● Transmission rate, max.		12 Mbit/s
Services
— PG/OP communication		Yes
— Routing		Yes
— Global data communication		Yes
— S7 basic communication		Yes
— S7 communication		Yes
— S7 communication, as client		No; but via CP and loadable FB
— S7 communication, as server		Yes
PROFIBUS DP master
● Transmission rate, max.		12 Mbit/s
● Number of DP slaves, max.		124
Services
— PG/OP communication		Yes
— Routing		Yes
— Global data communication		No
— S7 basic communication		Yes; I blocks only
— S7 communication		Yes
— S7 communication, as client		No
— S7 communication, as server		Yes
— Equidistance		Yes
— Isochronous mode		Yes; OB 61; isochronous mode can only be used alternatively on PROFIBUS DP or PROFINET IO
— SYNC/FREEZE		Yes
— Activation/deactivation of DP slaves		Yes
— Number of DP slaves that can be simultaneously activated/deactivated, max.		8
— Direct data exchange (slave-to-slave communication)		Yes; as subscriber
— DPV1		Yes
Address area
— Inputs, max.		8 kbyte
— Outputs, max.		8 kbyte
User data per DP slave
— Inputs, max.		244 byte
— Outputs, max.		244 byte
PROFIBUS DP slave
● Transmission rate, max.		12 Mbit/s
● automatic baud rate search		Yes; only with passive interface
● Address area, max.		32
● User data per address area, max.		32 byte
Services
— PG/OP communication		Yes
— Routing		Yes; Only with active interface
— Global data communication		No
— S7 basic communication		No
— S7 communication		Yes
— S7 communication, as client		No
— S7 communication, as server		Yes; Connection configured on one side only
— Direct data exchange (slave-to-slave communication)		Yes
— DPV1		No
Transfer memory
— Inputs		244 byte
— Outputs		244 byte
2. Interface
Interface type		PROFINET
Physics		Ethernet RJ45
Isolated		Yes
automatic detection of transmission rate		Yes; 10/100 Mbit/s
Autonegotiation		Yes
Autocrossing		Yes
Change of IP address at runtime, supported		Yes
Interface types
● Number of ports		2
● integrated switch		Yes
Protocols
● MPI		No
● PROFINET IO Controller		Yes; Also simultaneously with IO-Device functionality
● PROFINET IO Device		Yes; Also simultaneously with IO Controller functionality
● PROFINET CBA		Yes
● PROFIBUS DP master		No
● PROFIBUS DP slave		No
● Open IE communication		Yes; Via TCP/IP, ISO on TCP, and UDP
● Web server		Yes
PROFINET IO Controller
● Transmission rate, max.		100 Mbit/s
Services
— PG/OP communication		Yes
— Routing		Yes
— S7 communication		Yes; with loadable FBs, max. configurable connections: 16, max. number of instances: 32
— Isochronous mode		Yes; OB 61; isochronous mode can only be used alternatively on PROFIBUS DP or PROFINET IO
— IRT		Yes
— Shared device		Yes
— Prioritized startup		Yes
— Number of IO devices with prioritized startup, max.		32
— Number of connectable IO Devices, max.		128
— Of which IO devices with IRT, max.		64
— of which in line, max.		64
— Number of IO Devices with IRT and the option “high flexibility”		128
— of which in line, max.		61
— Number of connectable IO Devices for RT, max.		128
— of which in line, max.		128
— Activation/deactivation of IO Devices		Yes
— Number of IO Devices that can be simultaneously activated/deactivated, max.		8
— IO Devices changing during operation (partner ports), supported		Yes
— Number of IO Devices per tool, max.		8
— Device replacement without swap medium		Yes
— Send cycles		250 μs, 500 μs,1 ms; 2 ms, 4 ms (not in the case of IRT with “high flexibility” option)
— Updating time		250 µs to 512 ms (depending on the operating mode, see Manual “S7-300 CPU 31xC and CPU 31x, technical Data” for more details)
Address area
— Inputs, max.		8 kbyte
— Outputs, max.		8 kbyte
— User data consistency, max.		1 024 byte
PROFINET IO Device
Services
— PG/OP communication		Yes
— Routing		Yes
— S7 communication		Yes; with loadable FBs, max. configurable connections: 16, max. number of instances: 32
— Isochronous mode		No
— IRT		Yes
— PROFIenergy		Yes; With SFB 73 / 74 prepared for loadable PROFIenergy standard FB for I-Device
— Shared device		Yes
— Number of IO Controllers with shared device, max.		2
Transfer memory
— Inputs, max.		1 440 byte; Per IO Controller with shared device
— Outputs, max.		1 440 byte; Per IO Controller with shared device
Submodules
— Number, max.		64
— User data per submodule, max.		1 024 byte
PROFINET CBA
● acyclic transmission		Yes
● cyclic transmission		Yes
Open IE communication
● Number of connections, max.		16
● Local port numbers used at the system end		0, 20, 21, 23, 25, 80, 102, 135, 161, 443, 8080, 34962, 34963, 34964, 65532, 65533, 65534, 65535
● Keep-alive function, supported		Yes
Protocols
Redundancy mode
Media redundancy
— Switchover time on line break, typ.		200 ms; PROFINET MRP
— Number of stations in the ring, max.		50
Open IE communication
● TCP/IP		Yes; via integrated PROFINET interface and loadable FBs
— Number of connections, max.		16
— Data length for connection type 01H, max.		1 460 byte
— Data length for connection type 11H, max.		32 768 byte
— several passive connections per port, supported		Yes
● ISO-on-TCP (RFC1006)		Yes; via integrated PROFINET interface and loadable FBs
— Number of connections, max.		16
— Data length, max.		32 768 byte
● UDP		Yes; via integrated PROFINET interface and loadable FBs
— Number of connections, max.		16
— Data length, max.		1 472 byte
Web server
● supported		Yes
● User-defined websites		Yes
● Number of HTTP clients		5
Isochronous mode
Isochronous operation (application synchronized up to terminal)		Yes; Via PROFIBUS DP or PROFINET interface
Communication functions
PG/OP communication		Yes
Data record routing		Yes
Global data communication
● supported		Yes
● Number of GD loops, max.		8
● Number of GD packets, max.		8
● Number of GD packets, transmitter, max.		8
● Number of GD packets, receiver, max.		8
● Size of GD packets, max.		22 byte
● Size of GD packet (of which consistent), max.		22 byte
S7 basic communication
● supported		Yes
● User data per job, max.		76 byte
● User data per job (of which consistent), max.		76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)
S7 communication
● supported		Yes
● as server		Yes
● as client		Yes; via integrated PROFINET interface and loadable FB or via CP and loadable FB
● User data per job, max.		See online help of STEP 7 (shared parameters of the SFBs/FBs and of the SFCs/FCs of S7 Communication)
S5 compatible communication
● supported		Yes; via CP and loadable FC
PROFINET CBA (at set setpoint communication load)
● Setpoint for the CPU communication load		50 %
● Number of remote interconnection partners		32
● Number of functions, master/slave		30
● Total of all master/slave connections		1 000
● Data length of all incoming connections master/slave, max.		4 000 byte
● Data length of all outgoing connections master/slave, max.		4 000 byte
● Number of device-internal and PROFIBUS interconnections		500
● Data length of device-internal und PROFIBUS interconnections, max.		4 000 byte
● Data length per connection, max.		1 400 byte
Remote interconnections with acyclic transmission
— Sampling frequency: Sampling time, min.		500 ms
— Number of incoming interconnections		100
— Number of outgoing interconnections		100
— Data length of all incoming interconnections, max.		2 000 byte
— Data length of all outgoing interconnections, max.		2 000 byte
— Data length per connection, max.		1 400 byte
Remote interconnections with cyclic transmission
— Transmission frequency: Transmission interval, min.		10 ms
— Number of incoming interconnections		200
— Number of outgoing interconnections		200
— Data length of all incoming interconnections, max.		2 000 byte
— Data length of all outgoing interconnections, max.		2 000 byte
— Data length per connection, max.		450 byte
HMI variables via PROFINET (acyclic)
— Number of stations that can log on for HMI variables (PN OPC/iMap)		3; 2x PN OPC/1x iMap
— HMI variable updating		500 ms
— Number of HMI variables		200
— Data length of all HMI variables, max.		2 000 byte
PROFIBUS proxy functionality
— supported		Yes
— Number of linked PROFIBUS devices		16
— Data length per connection, max.		240 byte; Slave-dependent
Number of connections
● overall		32
● usable for PG communication		31
— reserved for PG communication		1
— adjustable for PG communication, min.		1
— adjustable for PG communication, max.		31
● usable for OP communication		31
— reserved for OP communication		1
— adjustable for OP communication, min.		1
— adjustable for OP communication, max.		31
● usable for S7 basic communication		30
— reserved for S7 basic communication		0
— adjustable for S7 basic communication, min.		0
— adjustable for S7 basic communication, max.		30
● usable for S7 communication		16
— reserved for S7 communication		0
— adjustable for S7 communication, min.		0
— adjustable for S7 communication, max.		16
● total number of instances, max.		32
● usable for routing		X1 as MPI: max. 10; X1 as DP master: max. 24; X1 as DP slave (active): max. 14; X2 as PROFINET: 24 max.
S7 message functions
Number of login stations for message functions, max.		32; Depending on the configured connections for PG/OP and S7 basic communication
Process diagnostic messages		Yes
simultaneously active Alarm-S blocks, max.		300
Test commissioning functions
Status block		Yes; Up to 2 simultaneously
Single step		Yes
Number of breakpoints		4
Status/control
● Status/control variable		Yes
● Variables		Inputs, outputs, memory bits, DB, times, counters
● Number of variables, max.		30
— of which status variables, max.		30
— of which control variables, max.		14
Forcing
● Forcing		Yes
● Forcing, variables		Inputs, outputs
● Number of variables, max.		10
Diagnostic buffer
● present		Yes
● Number of entries, max.		500
— adjustable		No
— of which powerfail-proof		100; Only the last 100 entries are retained
● Number of entries readable in RUN, max.		499
— adjustable		Yes; From 10 to 499
— preset		10
Service data
● can be read out		Yes
Ambient conditions
Ambient temperature during operation
● min.		0 °C
● max.		60 °C
Configuration
Configuration software
● STEP 7		Yes; V5.5 or higher
Programming
● Command set		see instruction list
● Nesting levels		8
● System functions (SFC)		see instruction list
● System function blocks (SFB)		see instruction list
Programming language
— LAD		Yes
— FBD		Yes
— STL		Yes
— SCL		Yes
— CFC		Yes
— GRAPH		Yes
— HiGraph®		Yes
Know-how protection
● User program protection/password protection		Yes
● Block encryption		Yes; With S7 block Privacy
Dimensions
Width		40 mm
Height		125 mm
Depth		130 mm
Weights
Weight, approx.		340 g
last modified:		05/28/2020