6ES7314-1AG14-0AB0 – SIMANIC S7-300

Thông số kỹ thuật: PLC S7-300 6ES7314-1AG14-0AB0

• Nhãn hiệu/Nhà sản xuất: Siemens
• Mã sản phẩm: 6ES7314-1AG14-0AB0
• Trọng lượng: 0.3
• Loại sản phẩm: Central Processing Unit
• Điện áp nguồn: 24 V dc
• Program capacity: 128 kB
• Current consumption: 650 mA
• Inrush current: 3.5 A (Typ.)
• Cpu processing time: 0.06
• Để sử dụng với: Simatic S7-300
• Number of digital inputs: 0
• Interface type: RS485

SIMATIC S7-300, CPU 314 CPU WITH MPI INTERFACE, INTEGRATED 24V DC POWER SUPPLY, 128 KBYTE WORKING MEMORY, MICRO MEMORY CARD NECESSARY

Toàn Phát đối tác phân phối độc quyền các thiết bị công nghiệp SIEMENS – 6ES7314-1AG14-0AB0 chính hãng đầy đủ hóa đơn chứng từ và nguồn gốc xuất sứ.
Tất cả sản phẩm của Toàn Phát được bảo hành 12 tháng.

Chính sách khi mua hàng SIMATIC S7-300

Chính sách bảo hành

Khi mua hàng tại TPNEWTECH, tất cả sản phẩm của chúng tôi được bảo hành 12 tháng. Luôn sẵn sàng hỗ trợ sửa chữa và bảo trì lắp đặt cho tất cả KH dù KH có mua nhiều hay mua ít.
Hỗ trợ sửa chữa tận nơi đối với KH ở khu vực nội thành TP.Hồ Chí Minh.
KH ở xa có thể gửi hàng thông qua các bên vận chuyển để được sửa chữa.

Chính sách vận chuyển

Tất cả KH khi mua hàng có địa chỉ nhận hàng ở khu vực TP.Hồ Chí Minh sẽ được miễn phí hoàn toàn chi phí giao hàng (thời gian giao hàng nội thành HCM từ 1-3 ngày làm việc).
Đối với các KH ngoại thành tùy vào số lượng đặt hàng lớn hay nhỏ chúng tôi sẽ linh động tối ưu chi phí giao hàng cho quý khách.

Hướng dẫn mua sản phẩm SIEMENS – 6ES7314-1AG14-0AB0

Để mua hàng quý khách có thể liên hệ với chúng tôi bằng cách gọi điện thoại hoặc Zalo

Hoặc gọi qua số điện thoại Hotline: (+84) 903 908 082

Thông tin kỹ thuật bổ sung 6ES7314-1AG14-0AB0

		SIMATIC S7-300, CPU 314 Central processing unit with MPI, Integr. power supply 24 V DC, work memory 128 KB, Micro Memory Card required
General information
HW functional status		01
Firmware version		V3.3
Engineering with
● Programming package		STEP 7 V5.5 + SP1 or higher or STEP 7 V5.2 + SP1 or higher with HSP 218
Supply voltage
Rated value (DC)
● 24 V DC		Yes
permissible range, lower limit (DC)		19.2 V
permissible range, upper limit (DC)		28.8 V
external protection for power supply lines (recommendation)		2 A min.
Mains buffering
● Mains/voltage failure stored energy time		5 ms
● Repeat rate, min.		1 s
Input current
Current consumption (rated value)		650 mA
Current consumption (in no-load operation), typ.		140 mA
Inrush current, typ.		3.5 A
I²t		1 A²·s
Power loss
Power loss, typ.		4 W
Memory
Work memory
● integrated		128 kbyte
● expandable		No
● Size of retentive memory for retentive data blocks		64 kbyte
Load memory
● Plug-in (MMC)		Yes
● Plug-in (MMC), max.		8 Mbyte
● Data management on MMC (after last programming), min.		10 y
Backup
● present		Yes; Guaranteed by MMC (maintenance-free)
● without battery		Yes; Program and data
CPU processing times
for bit operations, typ.		0.06 µs
for word operations, typ.		0.12 µs
for fixed point arithmetic, typ.		0.16 µs
for floating point arithmetic, typ.		0.59 µs
CPU-blocks
Number of blocks (total)		1 024; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.
DB
● Number, max.		1 024; Number range: 1 to 16000
● Size, max.		64 kbyte
FB
● Number, max.		1 024; Number range: 0 to 7999
● Size, max.		64 kbyte
FC
● Number, max.		1 024; Number range: 0 to 7999
● Size, max.		64 kbyte
OB
● Description		see instruction list
● Size, max.		64 kbyte
● Number of free cycle OBs		1; OB 1
● Number of time alarm OBs		1; OB 10
● Number of delay alarm OBs		2; OB 20, 21
● Number of cyclic interrupt OBs		4; OB 32, 33, 34, 35
● Number of process alarm OBs		1; OB 40
● Number of startup OBs		1; OB 100
● Number of asynchronous error OBs		4; OB 80, 82, 85, 87
● Number of synchronous error OBs		2; OB 121, 122
Nesting depth
● per priority class		16
● additional within an error OB		4
Counters, timers and their retentivity
S7 counter
● Number		256
Retentivity
— adjustable		Yes
— lower limit		0
— upper limit		255
— preset		Z 0 to Z 7
Counting range
— lower limit		0
— upper limit		999
IEC counter
● present		Yes
● Type		SFB
● Number		Unlimited (limited only by RAM capacity)
S7 times
● Number		256
Retentivity
— adjustable		Yes
— lower limit		0
— upper limit		255
— preset		No retentivity
Time range
— lower limit		10 ms
— upper limit		9 990 s
IEC timer
● present		Yes
● Type		SFB
● Number		Unlimited (limited only by RAM capacity)
Data areas and their retentivity
retentive data area in total		all, max. 64 KB
Flag
● Number, max.		256 byte
● Retentivity preset		MB 0 to MB 15
● Number of clock memories		8; 1 memory byte
Data blocks
● Retentivity adjustable		Yes; via non-retain property on DB
● Retentivity preset		Yes
Address area
I/O address area
● Inputs		1 024 byte
● Outputs		1 024 byte
Process image
● Inputs		1 024 byte
● Outputs		1 024 byte
● Inputs, adjustable		1 024 byte
● Outputs, adjustable		1 024 byte
● Inputs, default		128 byte
● Outputs, default		128 byte
Digital channels
● Inputs		1 024
— of which central		1 024
● Outputs		1 024
— of which central		1 024
Analog channels
● Inputs		256
— of which central		256
● Outputs		256
— of which central		256
Hardware configuration
Number of expansion units, max.		3
Number of DP masters
● integrated		0
● via CP		4
Number of operable FMs and CPs (recommended)
● FM		8
● CP, PtP		8
● CP, LAN		10
Rack
● Racks, max.		4
● Modules per rack, max.		8
Time of day
Clock
● Hardware clock (real-time)		Yes
● retentive and synchronizable		Yes
● Backup time		6 wk; At 40 °C ambient temperature
● Deviation per day, max.		10 s; Typ.: 2 s
● Behavior of the clock following POWER-ON		Clock continues running after POWER OFF
● Behavior of the clock following expiry of backup period		Clock continues to run with the time at which the power failure occurred
Operating hours counter
● Number		1
● Number/Number range		0
● Range of values		0 to 2^31 hours (when using SFC 101)
● Granularity		1 h
● retentive		Yes; Must be restarted at each restart
Clock synchronization
● supported		Yes
● to MPI, master		Yes
● to MPI, slave		Yes
● in AS, master		Yes
● in AS, slave		No
Digital inputs
Number of digital inputs		0
Digital outputs
Number of digital outputs		0
Analog inputs
Number of analog inputs		0
Analog outputs
Number of analog outputs		0
Interfaces
Number of industrial Ethernet interfaces		0
Number of PROFINET interfaces		0
Number of RS 485 interfaces		1; MPI
Number of RS 422 interfaces		0
1. Interface
Interface type		Integrated RS 485 interface
Physics		RS 485
Isolated		No
Power supply to interface (15 to 30 V DC), max.		200 mA
Protocols
● MPI		Yes
● PROFIBUS DP master		No
● PROFIBUS DP slave		No
● Point-to-point connection		No
MPI
● Transmission rate, max.		187.5 kbit/s
Services
— PG/OP communication		Yes
— Routing		No
— Global data communication		Yes
— S7 basic communication		Yes
— S7 communication		Yes; Only server, configured on one side
— S7 communication, as client		No
— S7 communication, as server		Yes
Communication functions
PG/OP communication		Yes
Data record routing		No
Global data communication
● supported		Yes
● Number of GD loops, max.		8
● Number of GD packets, max.		8
● Number of GD packets, transmitter, max.		8
● Number of GD packets, receiver, max.		8
● Size of GD packets, max.		22 byte
● Size of GD packet (of which consistent), max.		22 byte
S7 basic communication
● supported		Yes
● User data per job, max.		76 byte
● User data per job (of which consistent), max.		76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)
S7 communication
● supported		Yes
● as server		Yes
● as client		Yes; Via CP and loadable FB
● User data per job, max.		180 byte; With PUT/GET
● User data per job (of which consistent), max.		240 byte; as server
S5 compatible communication
● supported		Yes; via CP and loadable FC
Number of connections
● overall		12
● usable for PG communication		11
— reserved for PG communication		1
— adjustable for PG communication, min.		1
— adjustable for PG communication, max.		11
● usable for OP communication		11
— reserved for OP communication		1
— adjustable for OP communication, min.		1
— adjustable for OP communication, max.		11
● usable for S7 basic communication		8
— reserved for S7 basic communication		0
— adjustable for S7 basic communication, min.		0
— adjustable for S7 basic communication, max.		8
S7 message functions
Number of login stations for message functions, max.		12; Depending on the configured connections for PG/OP and S7 basic communication
Process diagnostic messages		Yes
simultaneously active Alarm-S blocks, max.		300
Test commissioning functions
Status block		Yes; Up to 2 simultaneously
Single step		Yes
Number of breakpoints		4
Status/control
● Status/control variable		Yes
● Variables		Inputs, outputs, memory bits, DB, times, counters
● Number of variables, max.		30
— of which status variables, max.		30
— of which control variables, max.		14
Forcing
● Forcing		Yes
● Forcing, variables		Inputs, outputs
● Number of variables, max.		10
Diagnostic buffer
● present		Yes
● Number of entries, max.		500
— adjustable		No
— of which powerfail-proof		100; Only the last 100 entries are retained
● Number of entries readable in RUN, max.		499
— adjustable		Yes; From 10 to 499
— preset		10
Service data
● can be read out		Yes
Ambient conditions
Ambient temperature during operation
● min.		0 °C
● max.		60 °C
Configuration
Configuration software
● STEP 7		Yes; V5.2 SP1 or higher with HW update
Programming
● Command set		see instruction list
● Nesting levels		8
● System functions (SFC)		see instruction list
● System function blocks (SFB)		see instruction list
Programming language
— LAD		Yes
— FBD		Yes
— STL		Yes
— SCL		Yes
— CFC		Yes
— GRAPH		Yes
— HiGraph®		Yes
Know-how protection
● User program protection/password protection		Yes
● Block encryption		Yes; With S7 block Privacy
Dimensions
Width		40 mm
Height		125 mm
Depth		130 mm
Weights
Weight, approx.		280 g
last modified:		05/28/2020